Avaya a System Processor Card in the Passport 5430 Multiservice Access Manuel d'utilisateur télécharger pdf (Page 53)

Connecting Cables

306311-A Rev 00

4-11

To connect an external modem to the Passport 5430, you need an AT or Hayes

compatible modem and the RJ-45 to DB-9 cable and adapter kit

(Order No. AA0011026) that Nortel Networks provided with the Passport 5430.

To connect an external console modem:

Configure the modem, using the parameters in Table 4-3.

See the modem user guide for instructions.

Turn off the modem.

Route the cable through the cable loom slot corresponding to PCI slot 1.

For instructions, see Installing and Operating the Passport 5430 Multiservice

Access Switch.

Insert the 8-pin receptacle end of the modem cable into the Passport 5430

Console interface (Figure 4-7)

For pin assignments, see Installing and Operating the Passport 5430

Multiservice Access Switch.

1 2 ... 48 49 50 51 52 53 54 55 56

Pas de commentaire

Avaya a System Processor Card in the Passport 5430 Multiservice Access Manuel d'utilisateur Page 53