Avaya BCM MSC FRU Replacement Process Manuel d'utilisateur télécharger pdf (Page 6)

6 MSC FRU replacement process

NN40010-315 Media Services Card replacement

4 Grasp the base function tray latches and partially remove the base function tray from the platform base chassis.

(Figure 1, #3)

Figure 1 Remove the base function tray

Figure 2 shows the position of the base function tray in a BCM400. Remove the tray in the same manner for both

hardware platforms.

Figure 2 BCM400 platform base function tray location

5 Disconnect DS30 cable connectors from the MSC.

If you have a Wide Area Network (WAN) card installed in the base function tray, then follow the procedure in

“Base function tray with WAN card installed” on page 7.

Continue with step 6.

Warning: Do not exert force on the DS30 cables or connectors.

1 2 3 4 5 6 7 8 9 10 11 ... 29 30

Pas de commentaire

Avaya BCM MSC FRU Replacement Process Manuel d'utilisateur Page 6