Avaya Bogen Universal Paging Access Module Manuel d'utilisateur télécharger pdf (Page 28)

Functional Test Guide

Use the following chart to verify proper operation after installation. To start the test,

pick up a telephone and call the UPAM.

[28]

4. Troubleshooting

Does the UPAM activate?

The UPAM is activated if it returns a tone over the telephone, the external

contacts close, and relays inside the unit click when paging is accessed.

NO YES

Check List

1. Double check for correct wiring to voice switch.

2. Make sure wires are making good contact.

3. Make sure power supply (if used) is working and is

correctly connected.

4. Recheck mode switch settings.

Is paging possible?

YES NO

DONE

Does UPAM activate now?

(Try to access paging again)

NO YES

Is paging possible?

YES NO

DONE

Follow Procedure A to determine if the UPAM is

functional.

Follow Procedure B to determine if an audio

path can be established through the voice

system and the UPAM.

1 2 ... 23 24 25 26 27 28 29 30

Pas de commentaire

Avaya Bogen Universal Paging Access Module Manuel d'utilisateur Page 28