Avaya 1200 Series Expansion Module for SIP Software Guide de l'utilisateur télécharger pdf (Page 20)

Setup and assembly

Adjusting the tilt base

The Avaya 1100 Series Expansion Module stand provides a continuous

tilt adjustment so the tilt angle matches the IP Deskphone stand angle

while accommodating variations in the desk surface. A clamp mechanism

is used to unlock and lock the foot stand angle from wall mount to desktop

configuration.

The Expansion Module is tightened by turning the wheel clockwise and loosened

by turning the wheel counter-clockwise.

Turn the wheel clockwise on the back right side (if viewed from the front)

of the Expansion Module to loosen the stand hinge. Adjust the angle of

the IP Deskphone using the tilt lever. When the IP Deskphone is set to a

preferred angle, turn the wheel counter-clockwise on the back of the

Expansion Module to tighten the stand hinge and lock the stand at the

same angle as the attached IP Deskphone.

CAUTION

Do not over tighten the wheel on the Expansion Module.

1 2 ... 15 16 17 18 19 20 21 22

Pas de commentaire

Avaya 1200 Series Expansion Module for SIP Software Guide de l'utilisateur Page 20