Avaya BCM450 Guide de configuration Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 13
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
NC; Reviewed:
11/11/2010
©2010 Avaya Inc. All Rights
Reserved.
ConfiguringSIPTrunkingMTS Allstream-
BCM6
Page 10 of 13
17. Under Normal Route column, double click and enter the route entered in Step 6.
18. Under the Absorbed Length column, specify the number of digits that will be absorbed before
pre-pending the configured External number configured in Step 9 and sending the rest of the
digits to the SIP trunking component.
19. While the row representing the Destination Code enter in Step 15 is selected, in the Alternate
Routes table that shows up below, click on an unused schedule
20. In the Second Route column of the selected row above, provide the route configure in Step 12.
21. Navigate to Configuration
Telephony
Scheduled Services
22. Click on the schedule used in Step 19 above.
23. Define the times when this schedule will be active by providing the start and stop times for each
day of the week.
24. In the Services section that appears below, select the schedule used in previous steps and do
the following:
double click the Routing Svc column and select Auto to active the schedule.
Enable overflow by putting a check in the Overflow checkbox
4.2.3 SIP Trunk Routing table Configuration
1. Navigate to Configuration
Resources
IP Trunks
SIP Trunking
2. Select the Public tab
3. Click on the Accounts tab
4. Select the first MTS Allstream account
5. In the Details for Accounts table below, in the drop down list next to Called Number Characters
to absorb select the number of digits that will be absorbed by the SIP trunking component
before sending the dialed digits to MTS Allstream. The number selected here should be the
number digits in the External Number configured in Step 9
6. Click on the Routing Table tab
7. Click on the Add button
8. In the Add Route dialog box;
Provide a descriptive name for the new route in the Name.
Set the Destination Digits to the value provide as the External Number in Step 9 of
section 4.2.2
In the ITSP Account drop down list, select the MTS Allstream account
9. Click OK
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13

Commentaires sur ces manuels

Pas de commentaire